Tentec Holding Group Limited

Email: info@jakko.cn

Contact Us

Tentec Holding Group Limited

Tel : 0086-571-8581 4969 

Fax : 0086-571-8601 0231

Email: info@jakko.cn

Address: Room 5, 6/F, Shun On Commercial Building,112-114 Des Voeux Road,Central, Hong Kong

American office address:1330 N.W.84th Ave.Miami Florida, zip 33126

Rotating Original Device Of Brake Disc

Tentec Holding Group Limited | Updated: Oct 31, 2017

The general brake is through the fixed element of the rotating element to exert the braking torque, so that the latter rotation angular velocity, while relying on the wheel and the ground adhesion, to produce the road to the wheel braking force to make the car slowed down. Brakes that produce braking torque by rubbing the working surface of the fixed element with the rotating element become friction brakes. At present, the friction brake used in automobiles can be divided into two categories: drum-type and disk-type.Brake Disc

The rotating element is fixed on the wheel or half shaft, the braking moment is directly used for the brake on both sides of the wheel, called the wheel brake. The rotating element is fixed on the transmission shaft of the drive system, and its braking torque is then assigned to the brakes on both sides of the wheel by the drive axle, which is called the central brake.Brake Disc Increasing potential and reducing potential effect, setting the direction of the brake drum rotation when the car is moving forward (this is called the brake drum forward rotation). In the direction of the arrow, the 1 supporting point of the brake shoe is 3 at its front end, and the driving force exerted by the brake wheel cylinder 6 is at the back end, so the rotation direction of the brake shoe is the same as that of the brake drum when it is opened.Brake Disc 

The brake shoe with this property is called the collar hoof. In contrast, the 2 support point of the brake shoe is 4 at the back end, and the driving force is added to the front end, and the direction of rotation is opposite to that of the brake drum when it is opened. The brake hoof with this property is called from the hoof. When the car is upside down, that is, when the brake drum rotates backwards, the hoof 1 becomes from the hoof, while the hoof 2 becomes the hoof. When the brake drum is rotated and rotated backwards, there is a collar and a brake from the hoof that is called a collar from the hoof brake.Brake Disc

Dual-collar shoe brakes and collar-type brakes are structurally different from two points, one is the two-collar shoe brakes with a single piston-type wheel cylinder, and the collar from the hoof brake of the two-hoof common with a double piston-type wheel cylinder; the second is two sets of brake shoe, brake wheel cylinder, Underwriting on the brake floor of the layout is the center of symmetry, and the collar from the hoof brakes in the brake shoe, brake wheel cylinder, underwriting on the brake floor of the arrangement is symmetrical layout.Brake Disc


Previous: No Information

Next: Friction Linings For Brake Shoe Blades

Copyright © Tentec Holding Group Limited All rights reserved.  
  • facebook
  • GooglePlus
  • link
  • print
  • twitter